Untitled Document

 

Universal Fan Coil Units A subsidiary of  
     
Floor standing cabinet type split AC units are designed to use with or without ductwork and for free standing applications in small offices, halls, restaurants etc.
 
 

Salient Features:
Floor Standing Cabinet

Special Exposed Unit
Decorative and Innovative
Ceiling Suspended Type
Floor Standing Type

QUALITY GUARANTEED
Universal fan-coil units are guaranteed against any mechanical failure resulted from defective materials, parts or faulty workman ship for a period of 12 months from the date of shipment from Factory. The Universal fan-coil units are designed for a minimum 10-year lifetime under normal running condition. However, many actual installations show that all the well maintained or serviced units have been in trouble-free operation beyond this designed life.

 
       
       

QUIET METAL/PLASTIC FANS (BLOWER)
Each unit incorporates metal/plastic fan(s) designed by guarantees a quieter-than-quiet run and requires less fan power. This fan, made of metal/plastic blades provides excellent corrosion-resistance and
durability in continuous operation.

SAFE, ENERGY-SAVING, LONG-LIFE MOTOR
Selected low-noise, energy-saving, permanent split-capacitor type motor is mounted on each unit.
The motor and bearings selected are designed for a 10 year life expectancy. However, many well-maintained units have been satisfactorily operating for more than 10 years.
In order to clear increasingly tough electrical safety requirements, the permanent split capacitor is totally canceled by metal cover and fitted on to motor enclosure. The motor lead out wires are sheathed into and protected by flexible metal/plastic conduit against possible damage during field installation work.
Versatile selections allowed for required condition:

FCU-SW Good for hotels, offices, hospitals
Quiet fan of suitable fan wheel driven by factory assembled quality motor.
Maximum safety by metal covered motor- condenser and flexible conduit. .
2,3,4 - row, 3/8" dia copper tubes mechanically bonded to high-heattransfer fins to give improved cooling \ heating capacities.
Fail-free, low-noise, power saving PSC motor mounted.

Construction:
The FCU unit is fabricated by rigid galvanized steel casing complete with well-balanced metal constructed DIDW fan(s) driven by PSC motor(s) and protected by flexible conduit, 3-row standard coil (optional 2/4 row cooling/1-row heating split circuit of Model FCUDC), and 5 mm standard. For servicing purpose, the fan motor deck can be removed from the coil section by externally unscrewing the fixtures accessible from the rear bottom of the unit. Standard plenum can befitted to the unit where so required atthe time of ordering.

 
MECHANICAL SPECIFICATIONS:
 
   
Basic Unit
Cool point units consist of a 1.00mm thick galvanized steel panels, copper/aluminum finned coil fan board assembly with motor(s) and direct mounted forward curved fan(s), condensate drain pan, air filter and accessory support legs.
 
       
   
Cabinet
Metal panels manufactured in 1.00mm thick galvanized steel, painted internally and externally with powder process.
 
   
 
   
Coils
9.5mm copper tubes mechanically coil tubes are in staggered pitch arrangement with tube centers of 25.4mm. Supply and return water connections are 1.2" female. Manual air vents and drains are standard. Coils are factory leak tested at 32 Bars and are recommended for operation up to 18 Bars working pressure with water temperature up to 105°C. Available coils are 3 rows (standard), 3 row.
 
       
   
Motors
Continuously rated permanent split capacitor motors with an internal thermal protector. Permanent lubricated motor bearings and resilient mountings to ensure vibration free operating to ensure vibration free operation.
 
       
   
Fans
Aluminum forward curved fan wheels mounted directly on the motor extension shaft fan and motor assemblies are dynamically balanced to ensure quiet, vibration free operation.
 
       
    Filters
Permanent synthetic, cleanable filters, 6mm polyester media.
 
       
    Drain Pan
Manufactured with 1.00mm galvanized steel externally lined with a 5mm thick closed cell insulation.
 
 
Specifications:    
     
Unit Data
Model
Cooling Capacity
Btus/hr
Air Flow
CFM
Weight (Kg)
Volt/Phase/Hz.
Indoor Outdoor
CW-UFCI-400
CW-UFCO-400
 12000
400
30
62
220/1/50
CW-UFCI-600
CW-UFCO-600
18000
600
41
65
220/1/50
CW-UFCI-800
CW-UFCO-800
 24000
800
41
68
220/1/50
CW-UFCI-1000
CW-UFCO-1000
30000
1000
53
69
220/3/50
 
 

Note:

1 - Specifications are subject to change without notice.
2 - All units are suitable for 380/3/50 or 220/1/50 supply.

 
 
Untitled Document
Home | About Us | Services | Products | Contact Us  

Registered Trademark of Cool Point.
All contents 2005-2006 Cool Industries Pvt. Limited.
Site Designed Developed by MIS Department